page 1 of 3 issued date 2008/05/21 output specifications output power 5 watts, max. voltage accuracy full load and nominal vin 1% minimum load 0% line regulation ll to hl at full load 0.2% load regulation no load to full load single dual 0.5% 1% cross regulation(dual) asymmetrical load 25% / 100% fl 5% ripple and noise 20mhz bandwidth see table temperature coefficient 0.02% / oc, max. transient response recovery time 25% load step change 200 s over load protection % of fl at nominal input 170%, typ. short circuit protection continuous, automatics recovery general specifications efficiency see table isolation voltage input to output input ( output ) to case dip smd 1600vdc, min. 1600vdc, min. 1000vdc, min. isolation resistance 10 9 ohms, min. isolation capacitance 300pf, max. switching frequency 300khz, typ. approvals and standard iec60950-1, ul60950-1, en60950-1 case material nickel-coated copper base material non-conductive black plastic potting material epoxy (ul94-v0) dimensions 1.25 x 0.80 x 0.40 inch (31.8 x 20.3 x 10.2 mm) weight dip smd 16g (0.55oz) 18g (0.62oz) mtbf (note 1) bellcore tr-nwt-000332 mil-hdbk-217f 3.165 x 10 6 hrs 1.631 x 10 6 hrs input specifications input voltage range fkc05 fkc05-w 12v nominal input 24v nominal input 48v nominal input 24v nominal input 48v nominal input 9 ? 18vdc 18 ? 36vdc 36 ? 75vdc 9 ? 36vdc 18 ? 75vdc input filter pi type input surge voltage 100ms max 12v input 24v input 48v input 36vdc 50vdc 100vdc input reflected ripple current nominal vin and full load 20map-p start up time nominal vin and constant resistive load power up 450ms, max. environmental specifications operating ambient temperature standard m1 (note 6) m2 (w series) -25oc~+85oc (with derating) -40oc~+85oc (non-derating) -40oc~+85oc (with derating) maximum case temperature standard m1 +100oc +105oc storage temperature range -55oc ~ +105oc thermal impedance nature convection 20oc/watt thermal shock mil-std-810f vibration mil-std-810f relative humidity 5% to 95% rh emc characteristics emi en55022 class a esd en61000-4-2 air contact 8kv 6kv perf. criteria a radiated immunity en61000-4-3 10 v/m perf. criteria a fast transient (note 7) en61000-4-4 2kv perf. criteria b surge (note 7) en61000-4-5 1kv perf. criteria b conducted immunity en61000-4-6 10 vr.m.s perf. criteria a features ? 5 watts output power ? output current up to 1000ma ? standard 1.25 x 0.80 x 0.40 inch ? high efficiency up to 84% ? 2:1 and 4:1 wide input voltage range ? five-sided shield ? fixed switching frequency ? standard 24 pin dip package & smd type package ? ce mark meets 2006/95/ec, 93/68/eec and 2004/108/ec ? ul60950-1, en60950-1 and iec60950-1 licensed ? iso9001 certified manufacturing facilities ? compliant to rohs eu directive 2002/95/ec options smd type, m1 type, m2 type description the fkc05 series offer 5 watts of output power from a package in an ic compatible 24pin dip configuration without derating to 71oc ambient temperature and pin to pin compatible with fkc03 series. fkc05 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75vdc. fkc05-w series have 4:1 ultra wide input voltage of 9-36 and 18 - 75vdc technical specification all specifications are typical at nomin al input, full load and 25oc otherwise noted applications wireless network telecom/datacom industry control system measurement equipment semiconductor equipment
page 2 of 3 issued date 2008/05/21 note 1. bellcore tr-nwt-000332. case 1 50% stress, temperature at 40oc. mil-hdbk-217f notice2 @ta=25 oc, full load(ground, benign, controlled environment). 2. maximum value at nominal input voltage and full load of standard type. 3. typical value at nominal input voltage and no load. 4. typical value at nominal input voltage and full load. 5. test by minimum vin and constant resistive load. 6. m1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard and m2 versi on. 7. an external input filter capacitor is required if the module has to meet en61000-4-4, en61000-4-5. the filter capacitor power mate suggest: nippon chemi-con ky series, 220 f/100v, esr 48m 8. there is no pin at pin10 & pin15 for fkc05-w series. output current input current model number input range output voltage min. load full load output (4) ripple & noise no load (3) full load (2) eff (4) (%) capacitor (5) load max fkc05-12s33 9 ? 18 vdc 3.3 vdc 0ma 1000ma 50mvp-p 10ma 382ma 76 2200 f fkc05-12s05 9 ? 18 vdc 5 vdc 0ma 1000ma 50mvp-p 10ma 563ma 78 1000 f fkc05-12s12 9 ? 18 vdc 12 vdc 0ma 470ma 50mvp-p 10ma 603ma 82 220 f fkc05-12s15 9 ? 18 vdc 15 vdc 0ma 400ma 50mvp-p 10ma 649ma 81 150 f FKC05-12D05 9 ? 18 vdc 5 vdc 0ma 500ma 50mvp-p 15ma 563ma 78 680 f fkc05-12d12 9 ? 18 vdc 12 vdc 0ma 230ma 50mvp-p 20ma 597ma 81 100 f fkc05-12d15 9 ? 18 vdc 15 vdc 0ma 190ma 50mvp-p 15ma 594ma 84 68 f fkc05-24s33 (w) 18 ? 36 (9 ? 36) vdc 3.3 vdc 0ma 1000ma 50mvp-p 10ma(5ma) 194ma (191ma) 75 (76) 2200 f fkc05-24s05 (w) 18 ? 36 (9 ? 36) vdc 5 vdc 0ma 1000ma 50mvp-p 15ma(10ma) 285ma (278ma) 77 (79) 1000 f fkc05-24s12 (w) 18 ? 36 (9 ? 36) vdc 12 vdc 0ma 470ma 50mvp-p 15ma(5ma) 305ma (305ma) 81 (81) 220 f fkc05-24s15 (w) 18 ? 36 (9 ? 36) vdc 15 vdc 0ma 400ma 50mvp-p 15ma(10ma) 325ma (312ma) 81 (84) 150 f fkc05-24d05 (w) 18 ? 36 (9 ? 36) vdc 5 vdc 0ma 500ma 50mvp-p 15ma(10ma) 274ma (282ma) 80 (78) 680 f fkc05-24d12 (w) 18 ? 36 (9 ? 36) vdc 12 vdc 0ma 230ma 50mvp-p 20ma(10ma) 288ma (295ma) 84 (82) 100 f fkc05-24d15 (w) 18 ? 36 (9 ? 36) vdc 15 vdc 0ma 190ma 50mvp-p 20ma(10ma) 308ma (297ma) 81 (84) 68 f fkc05-48s33 (w) 36 ? 75 (18 ? 75) vdc 3.3 vdc 0ma 1000ma 50mvp-p 10ma(5ma) 98ma (100ma) 74 (73) 2200 f fkc05-48s05 (w) 36 ? 75 (18 ? 75) vdc 5 vdc 0ma 1000ma 50mvp-p 10ma(10ma) 143ma (138ma) 77 (79) 1000 f fkc05-48s12 (w) 36 ? 75 (18 ? 75) vdc 12 vdc 0ma 470ma 50mvp-p 10ma(10ma) 151ma (155ma) 82 (80) 220 f fkc05-48s15 (w) 36 ? 75 (18 ? 75) vdc 15 vdc 0ma 400ma 50mvp-p 10ma(10ma) 162ma (160ma) 81 (82) 150 f fkc05-48d05 (w) 36 ? 75 (18 ? 75) vdc 5 vdc 0ma 500ma 50mvp-p 10ma(10ma) 141ma (145ma) 78 (76) 680 f fkc05-48d12 (w) 36 ? 75 (18 ? 75) vdc 12 vdc 0ma 230ma 50mvp-p 5ma(10ma) 147ma (151ma) 82 (80) 100 f fkc05-48d15 (w) 36 ? 75 (18 ? 75) vdc 15 vdc 0ma 190ma 50mvp-p 10ma(10ma) 150ma (156ma) 83 (80) 68 f fkc05-48s05 derating curve 0 20 40 60 80 100 120 -40 -25 -10 5 20 35 50 65 80 95 110 ambient temperature( ) output power (%) m1 version m1 version 70.1 105
page 3 of 3 issued date 2008/05/21 fkc05-48s05 efficiency vs output load 40 45 50 55 60 65 70 75 80 85 90 10 20 30 40 50 60 70 80 90 100 output load (% of full load) efficiency(%) dip pin connection pin single dual 2 - input - input 3 - input - input 9 nc common 23 + input + input 22 + input + input 16 - output common 10 nc(note 8) nc(note 8) 15 nc(note 8) nc(note 8) pin single dual 11 nc - output 14 + output + output smd pin connection pin single dual 2 - input - input 3 - input - input 9 nc common 23 + input + input 22 + input + input 16 - output common 10 nc nc 15 nc nc pin single dual 11 nc - output 14 + output + output others nc nc others nc nc 0.80(20.3) pin size is 0.02(0.5) dia or 0.01 x 0.02 (0.25 x 0.50) rectangular pin 14 23 22 16 3 9 2 11 1.25 (31.8) 0.600(15.24) 0.40 (10.2) 0.15 (3.8) 0.700 (17.78) 0.200 (5.08) 0.18(4.6) bottom view 15 10 1. all dimensions in inches (mm) tolerance: x.xx 0.02 (x.x 0.5) x.xxx 0.01 (x.xx 0.25) 2. pin pitch tolerance 0.01(0.25) 3. pin dimension tolerance 0.004 (0.1) suffix-smd 1.00(25.4) 0.92(23.4) 0.44(11.2) 0.43(10.9) 0.100 (2.54) 0.15 (3.8) 0.25 (6.4) 1.26 (32.0) 0.80(20.3) 0.02(0.5) 24 13 16 20 12 1 5 9 bottom view pin area 0.04 x 0.02 (1.0 x 0.5)
|
